概述

Introduction

　　TDG/SK皮带调速定量给料机在消化吸收国外先进技术的基础上推出的拥有自主知识产权的新一代定量给料机，中国机械行业产品。广泛应用于建材、冶金、化工等行业块状、颗粒状物料的计量和定量给料。

TDG/SK Variable Speed Belt Quantitative Feeder is generally used for quantitative feeding control of industrial lumpy material. The weighing mechanism adopts installation way of direct pressure roller double sensors, which is sensitive to the load change. It has good overall performance, high accuracy and strong adaptability.

技术指标

Technical indexes

　　适用物料

　　(常温皮带)：块状物料，粒径<80mm，物料温度<120℃

　　(高温皮带)：块状物料，粒径<80mm，物料温度<150℃

       Applicable material

       (normal temperature belt): lumpy material, size<80mm, material temperature < 120℃

       (high temperature belt): lumpy material, size<80mm, material temperature < 150℃

　　给料能力 Feeding capacity：0.5～1800m3/h

　　计量精度 Metering accuracy：≤±0.5%

　　控制精度 Control accuracy：≤±1.0%

　　适用环境：环境温度-30C~60℃，露天放置应当注意防雨锈蚀

       Applicable ambient: ambient temperature -30℃~60℃, pay attention to rain and rust in the open air.

系统特点

Characteristics

　　1.采用特殊成型整体式机械框架，稳定性好。

　　2.采用密封型外球面自动调心轴承，适应高粉尘恶劣环境。

　　3.采用直接承载式称重，荷重反应灵敏真实。

　　4.采用进口高精度金属密封称重传感器，测量精度

　　5.集成自动跑偏调整装置，可以在一定范围内防止皮带跑偏。

       1. It adopts the special molding integral mechanical frame with good stability.

       2. It adopts sealed spherical self-aligning bearing, which is suitable for bad environment with high dust.

       3. It adopts direct bearing weighing with sensitive and real load response.

       4. It adopts imported metal sealed load cell with high measuring accuracy.

       5. It adopts the integral automatic off-tracking adjusting device for avoiding belt off-tracking in a certain      range.

注：以上为常规型号，如有特殊需要，可以定做最大能力小于1800m3 /h 的定量给料机

                           Note: the models above are the general ones; the quantitative feeder, whose maximum capacity is less than 1800m3 /h, can be customized for special requirements.